
Model 3631
Model 3631 constant flow regulator comes with a choice of an AISI 316 stainless steel or aluminum body. It is a sturdy, industrial constant flow regulator.
It is designed to provide a constant flow of liquids in applications where supply or backpressure varies and to provide a constant flow of gases in applications where backpressure varies. It is a membrane type differential pressure controller with alarm function. It is supplied with Model L variable area flow meter for flow rate indication and setting.
Typical applications are water purging for instruments, gas purging in Δp measurements and hydrostatic density measurements.
Technical Data | ||||||||
Body | AISI 316 or aluminium | |||||||
Spring | AISI 316 | |||||||
Membrane | EPDM | |||||||
Plate | Nylon (PA 6) (*PVDF) | |||||||
Mesh | PTFE | |||||||
Seals | Nitrile (*Viton, EPDM) | |||||||
Connections | NPT 1/4” (G 1/4”) | |||||||
Maximum flow, H2O | 24 USGPH | |||||||
Maximum flow, air | 127 SCFH / 87 psig | |||||||
Maximum differential pressure | 145 psi | |||||||
Maximum static pressure | 290 psi | |||||||
Minimum required pressure drop | 29 psi | |||||||
Maximum temperature | 167°F (*176°F) | |||||||
Installation position | Vertically | |||||||
Weight | 2.6 lbs. AISI 316 body 1.3 lbs. Aluminum body |
|||||||
*Special construction on request |
Downloads & Support
Send us e-mail Download Data SheetContact usFlow meter selector toolFlow rate conversion formulaProduct key
